(Pb,La)(Zr,Sn,Ti) O3反铁电薄膜驱动的MEMS微悬臂梁研究

A MEMS microcantilever actuated by (Pb, La)(Zr, Sn, Ti) O3 antiferroelectric film

  • 摘要: 采用溶胶-凝胶法在LaNiO3/Si基底上制备了(Pb0.97La0.02)(Zr0.9Sn0.05Ti0.05) O3(PLZST)反铁电薄膜。结合微机电系统(MEMS)微加工工艺,集成制造了PLZST反铁电薄膜驱动的硅基MEMS悬臂梁,研究了PLZST薄膜结构的电学性能和悬臂梁的频率响应特性。测得反铁电薄膜具有典型双电滞回线,最大极化强度约为90 μC/cm2,一阶谐振峰约为15.44 kHz,振型良好。大气环境下的机械品质因子Q值高达787,满足用于谐振器的灵敏度和响应速度要求,这表明该MEMS悬臂梁在微型谐振器和传感器领域将具有广泛应用前景。

     

    Abstract: (Pb0.97 La0.02)(Zr0.9 Sn0.05 Ti0.05) O3(PLZST) antiferroelectric film has been deposited on LaNiO3/Si substrates by a sol-gel method.A microcantilever actuated by PLZST film was fabricated by micro-electro-mechanical system (MEMS) technology.The electrical properties of the PLZST thin-film structure and the frequency response characteristics of the cantilever beam were investigated.The antiferroelectric thin film with typical double hysteresis lines, a maximum polarization intensity of about 90 μC/cm2, and the measured fundamental resonance frequency of the microcantilever is about 15.44 kHz with a good vibration pattern were measured.The mechanical quality factor Q value under atmospheric conditions is as high as 787, which meets the sensitivity and response speed requirements for resonators, indicating that this MEMS cantilever beam will have a wide range of applications in the field of miniature resonators and sensors.

     

/

返回文章
返回